Created on 19 Oct 2021
Creating art, one drop of batter at a time
Part | Cost | Quantity | Total |
controller and stepper motor | $64.99 | 1 | $64.99 |
stepper motors, drivers, and controller | |||
Griddle | $30.00 | 1 | $30.00 |
griddle for the pancakes | |||
belt pulleys+belt | $16.99 | 1 | $16.99 |
belts so steppers can actually do stuff | |||
1/4-20 nut | $4.49 | 1 | $4.49 |
used for bearing bolts | |||
bearing bolt | $7.84 | 1 | $7.84 |
bolts to hold bearing | |||
1/4"id-1/2"od bearings | $8.49 | 2 | $16.98 |
for the craaige sliding | |||
8020 20mmx20mm 10ft | $28.79 | 1 | $28.79 |
8020 for all structure | |||
squeezy bottle | $6.99 | 1 | $6.99 |
to hold the pancake mix | |||
peristaltic pump | $38.00 | 1 | $38.00 |
pump for the pancakes | |||
1kg PETG | $20.99 | 1 | $20.99 |
filament for parts we forget about | |||
24v power supply | $16.99 | 1 | $16.99 |
gives the power | |||
Tubing | $4.65 | 1 | $4.65 |
tubing for pancake mix | |||
M5x10mm | $4.31 | 1 | $4.31 |
M5 screws used for assembly | |||
M5 nut | $1.70 | 1 | $1.70 |
used for all M5 retention | |||
t nut | $2.45 | 5 | $12.25 |
for holding the 8020 together | |||
zip ties | $6.14 | 1 | $6.14 |
for all tube retention | |||
acryllic sheet | $9.70 | 1 | $9.70 |
acryllic to be all our structure | |||
pancake mix | $5.95 | 1 | $5.95 |
pancake mix for pancakes | |||
Project Totals: | 23 | $297.75 | |
Track 1 Base Budget: | $250.00 | ||
Preferred Vendor Budget Bonus: | $50.00 | ||
Remaining Budget: | $2.25 |