Created on 29 Oct 2018
Play a Space Invaders-like game on an LED display, controlled by physical inputs on a glove.
Part | Cost | Quantity | Total |
Soldering iron | $38.97 | 1 | $38.97 |
gotta put this shit together somehow | |||
Solder | $9.96 | 1 | $9.96 |
For helping with soldering | |||
Soldering iron tips | $16.99 | 1 | $16.99 |
For helping with soldering | |||
Gloves | $9.99 | 1 | $9.99 |
Gloves to put the sensors on | |||
Accelerometer/orientation sensor | $34.95 | 1 | $34.95 |
9DOF sensor to tell the orientation and acceleration of the glove | |||
Force sensor | $7.00 | 6 | $42.00 |
Sense if there is force on the glove in various places | |||
Conductive Thread | $5.95 | 1 | $5.95 |
Gets threaded into the gloves for sensing | |||
Raspberry Pi | $49.99 | 1 | $49.99 |
For controlling LED grid | |||
RGB Display | $24.95 | 1 | $24.95 |
Using it as a display/feedback for glove motions | |||
Jack to terminal converter | $2.00 | 1 | $2.00 |
Converts 5v LED wall power to terminals to power from | |||
14 segment display | $7.95 | 5 | $39.75 |
For displaying words/commands | |||
jumper cables | $3.95 | 1 | $3.95 |
To wire up LED display | |||
Power Chord for LEd display | $14.95 | 1 | $14.95 |
Powers LED display | |||
Project Totals: | 22 | $294.40 | |
Track 1 Base Budget: | $250.00 | ||
Preferred Vendor Budget Bonus: | $50.00 | ||
Remaining Budget: | $5.60 |