Created on 24 Oct 2018
A dance floor that lights up based on the kinetic energy from dancing
Part | Cost | Quantity | Total |
Rack for Gear | $28.75 | 1 | $28.75 |
convert linear motion to spin gear | |||
Gear | $23.73 | 1 | $23.73 |
Gear to spin motor | |||
Compression Spring | $10.06 | 1 | $10.06 |
To spring the dance floor back up | |||
Acrylic Plexiglass Plastic Sheet | $53.99 | 1 | $53.99 |
Clear plastic for dance plastic | |||
Panasonic Batteries | $24.90 | 1 | $24.90 |
Storing energy created | |||
1N5819 schottky diodes | $0.41 | 8 | $3.28 |
Helping convert kinetic energy to electrical | |||
Arduino Mega | $24.90 | 1 | $24.90 |
Arduino mega to control LED output | |||
LED Strip | $10.99 | 4 | $43.96 |
Light up the dance floor | |||
Stepper Motor | $13.90 | 1 | $13.90 |
Motor to generate energy | |||
15F supercapacitor | $9.38 | 1 | $9.38 |
Helping convert kinetic energy to electrical | |||
1N4733 5.1V zener diode | $0.27 | 1 | $0.27 |
Helping convert kinetic energy to electrical | |||
Half-size breadboard | $5.00 | 1 | $5.00 |
Connecting wires | |||
330 ohm resistor | $0.10 | 1 | $0.10 |
Helping convert kinetic energy to electrical | |||
0.1uF capacitor | $0.23 | 1 | $0.23 |
Helping convert kinetic energy to electrical | |||
100 ohm resistor | $0.10 | 1 | $0.10 |
Helping convert kinetic energy to electrical | |||
Project Totals: | 25 | $242.55 | |
Track 1 Base Budget: | $250.00 | ||
Preferred Vendor Budget Bonus: | $0.00 | ||
Remaining Budget: | $7.45 |