Created on 08 Nov 2017
Because MinesweepAR wasn't hard enough.
Part | Cost | Quantity | Total |
1.5" screws | $6.17 | 2 | $12.34 |
Screws to hold the frame together (100 pack) | |||
Reed Switch | $8.88 | 1 | $8.88 |
(10 count) Reed Switch for the switch | |||
2' x 4' 1/16" polycarbonate sheet | $23.46 | 1 | $23.46 |
Polycarbonate sheet used for the front of the viewing area | |||
1" x 10' Magnetic Tape | $12.97 | 1 | $12.97 |
Magnetic field for the reed switch | |||
5m Individually addressable LEDs strip | $34.99 | 4 | $139.96 |
These LEDs will be used to allow the aliens to shoot back. | |||
Motor Controller 29 | $9.99 | 6 | $59.94 |
Actually controlling the motors. There may be slightly cheaper options available, but at stall curre | |||
2-Wire Motor 393 (276-2177) | $14.99 | 6 | $89.94 |
Motors to drive gun system | |||
Coat Hanger | $7.92 | 1 | $7.92 |
Wire mount for the button | |||
3.25" Omni-Directional Wheel (4-Pack) and 3.25" Traction Wheel (4-Pack | $59.98 | 1 | $59.98 |
Omni wheels and traction wheels are on the same page, please buy 1 pack for both (4 of each wheel) | |||
Motor 393 Integrated Encoder Module (2-pack) | $29.99 | 3 | $89.97 |
Encoders for the gun system. May not be strictly necessary. | |||
7.2V Robot Battery NiMH 3000mAh + Smart Charger v2 + Battery Charger P | $138.94 | 1 | $138.94 |
All 3 of these are on the same page, please buy 4x 3000 batteries, 1 smart charger, and 1 power cord | |||
Aluminum Plate | $22.26 | 1 | $22.26 |
12"x24" sheet (Cut into 4" square pieces) Conductor for button | |||
Vinyl Sheeting | $22.55 | 1 | $22.55 |
Vinyl sheeting to catch any BBs that ricochet | |||
Grommet Kit | $8.36 | 1 | $8.36 |
Grommet kit will be used to attach the vinyl to the frame, along with 3m hooks donated by team membe | |||
Project Totals: | 30 | $697.47 | |
Track 2 Base Budget: | $950.00 | ||
Preferred Vendor Budget Bonus: | $0.00 | ||
Remaining Budget: | $252.53 |