Pretti Spinni Boi ShineMaster™
Created on 07 Nov 2017
Pretty pretti, pretty spinni, 100% ShineMaster™
The Pretti Spinni Boi ShineMaster™ is a high resolution Persistance of Vision LED display. By deftly twirling a high density LED light strip at 800 RPM, this Boi will create a whirlpool of color displaying a two foot diameter circular image. Curious passerby can interact with this formidable ShineMaster™ through a web application, and watch as their drawings dance through thin air, powered by his vortex of liquid light.
@aperley
Aaron Perley
@jchernak
Jess Chernak
@aakent
Alex Kent
@cvsmith
Chris Smith
@eporat
Emily Porat
| Part | Cost | Quantity | Total |
| 9.7:1 Metal Gearmotor 25Dx48L mm HP 12V with 48 CPR Encoder | $36.95 | 1 | $36.95 |
| 9.7:1 Metal Gearmotor 25Dx48L mm HP 12V with 48 CPR Encoder | |||
| Metal Pushbutton - Latching (16mm, Blue) | $4.95 | 1 | $4.95 |
| Metal Pushbutton - Latching (16mm, Blue) | |||
| Texas Instruments CD4022BE | $0.51 | 2 | $1.02 |
| CMOS Octal Counter | |||
| Cytron 10A Bi-directional DC Motor Driver, 5-30V, 30A peak | $14.58 | 1 | $14.58 |
| Cytron 10A Bi-directional DC Motor Driver, 5-30V, 30A peak | |||
| Mounting Hub | $7.95 | 1 | $7.95 |
| Hub to mount the spinny boi | |||
| Sandisk Ultra - Flash memory card - 16 GB - MicroSDHC UHS-I | $6.99 | 1 | $6.99 |
| MicroSD Card for Raspberry Pi | |||
| Ball Bearing | $5.77 | 3 | $17.31 |
| Ball bearings for shafts | |||
| Shaft Coupler - 1/4" to 1/4" | $4.99 | 1 | $4.99 |
| Shaft Coupler - 1/4" to 1/4" | |||
| Shaft Coupler - 1/4" to 4mm" | $4.99 | 1 | $4.99 |
| Shaft Coupler - 1/4" to 4mm" | |||
| Plastic Gear - 14 1/2 Pressure angle | $6.87 | 2 | $13.74 |
| Press fit, 48 Pitch, 42 teeth | |||
| Raspberry Pi 3 - Model B - ARMv8 with 1G RAM ID: 3055 - $35.00 : Adafr | $35.00 | 1 | $35.00 |
| Raspberry Pi 3 Model B | |||
| Slip Ring with Flange - 22mm diameter, 6 wires, max 240V @ 2A ID: 736 | $14.95 | 1 | $14.95 |
| 6 wire slip ring with flange | |||
| Adafruit DotStar Digital LED Strip - Black 144 LED/m - One Meter [BLAC | $49.95 | 1 | $49.95 |
| 1m LED strip black, 144 LED/m | |||
| Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM | $4.95 | 1 | $4.95 |
| Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM | |||
| Plastic Gear - 14-1/2 Degree Pressure Angle | $9.68 | 1 | $9.68 |
| Press-Fit Mount, 48 Pitch, 96 Teeth | |||
| GRAY acrylic for tower - PLEASE ORDER GRAY COLOR | $18.80 | 2 | $37.60 |
| acrylic for the tower to house all electronics | |||
| Clear Acrylic - 12x24x1/8" sheet | $15.76 | 1 | $15.76 |
| Clear acrylic for the propeller | |||
| 1ft 0.035" Wall Thickness, 1/4" OD Aluminum Tubing | $5.61 | 1 | $5.61 |
| Tubing for shafts | |||
| Acrylic Weld On | $8.55 | 1 | $8.55 |
| Chemical acrylic welder | |||
| Project Totals: | 24 | $295.52 | |
| Track 1 Base Budget: | $250.00 | ||
| Preferred Vendor Budget Bonus: | $50.00 | ||
| Remaining Budget: | $4.48 | ||